Installation

*Please note that the StrapsAway backing has recently changed. If you have the original backing, the concept is the same. However, instead of pushing down on the black disc, you will push down on the bottom of the metal clasp, and pull up on the top of it, to stretch the internal spring that releases the pin.

Step 1: Using your thumb and index finger, push down on the black disk. 

Step 2: While holding the disk down, pinch the metal clasp, lifting the top flat piece away from the disc. There is a spring inside the metal clasp that needs to be stretched so that it releases the pin.  

Step 3. With the disc pushed down while the metal top is stretched up, the backing can now be removed with ease.

Step 4. Pin the magnet into the car seat fabric in the desired location. 

Step 5: Place the backing on the pin securely, and pull on the magnet top to ensure it is fastened.